Gardner Products - Insect Control for Warehouse/Industrial/Agricultural

Jump to:

Non-Sensitive Area Traps

Sensitive Area Traps

FlyWeb Family of Products

<AG-961 <AG-969 <RG-1002 <AG-661* <AG-963 <AG-970 <AG-241

PRODUCTS FOR WAREHOUSE/INDUSTRIAL
& AGRICULTURAL AREAS

Suggested for use in:
Bakeries, Pharmaceutical, Warehousing, Food Manufacturing, Bottling/Packaging Plants, Docks; *Marinas, Parking Lots, Outdoor Areas, Warehouses, Stadiums

AG-961 Compact Insect Electrocutor

The AG-961 Insect Electrocutor is a compact, yet powerful light trap for small areas where space is limited. It's 80 watts of U.V. light attraction is the highest available in a trap of this size. It is open on both sides for 360º visibility, and kills insects on a protected electric grid. Dead insects are contained in a removable drawer. The light can be suspended from a ceiling, mounted 3-6 feet high on a wall, or used as a portable tabletop trap.

AG-961 features:

24-hour, non-chemical trapping
Aluminum construction which never rusts
Covers 2,500 sq. ft. (50 lineal ft.)
No glue board replacement cost
U.V. output increased to 80 watts of insect attraction
UL listed; 115v/60hz, with 6' cord
FDA & USDA accepted under current code
3 year limited warranty
Dimensions: 26"W x 14"H x 5.5"D

-return to top-

AG-969 Insect Electrocutor

The AG-969 Insect Electrocutor is the top rated wall mount light trap with 120 watts of U.V. light attraction. Flying insects are electrocuted on an internal grid and then dropped into a removable capture tray. The capture tray allows easy access for evaluation, identification, and disposal of flying insects. The AG-969 is ideal for aggressive control in sensitive areas. USDA studies show the 120 watts of U.V. light output provides the optimum fly attraction. Install light 3-6 feet high on the wall.

AG-969 features:

24 hour, non-chemical trapping
Aluminum construction which never rusts
Covers 3,500 sq. ft. (70 lineal ft.)
No glue board replacement cost
U.V. output increased to 120 watts of insect attraction
UL listed; 115v/60hz, with 6' cord
FDA & USDA accepted under current code
3 year limited warranty
Dimensions: 19.25"W x 30"H x 5.75"D

-return to top-

RG-1002 Insect Electrocutor

The RG-1002 Insect Electrocutor is designed for wall or corner mount positions inside buildings with flying insect problems. The angled rear design of the RG-1002 allows the light trap to fit into tight corner locations. When vertically mounted 1-2 feet above the floor, the 48" U.V. Insect Light shines just above the floor area where flying insects are most active.

RG-1002 features:

24 hour, non-chemical trapping
WHITE powder-coated steel construction
Covers 2,500 sq. ft. (50 lineal ft.)
No glue board replacement cost
80 watts of U.V. insect attraction
UL listed; 115v/60hz, with 6' cord
FDA & USDA accepted under current code
3 year limited warranty
Dimensions: 14"W x 57"H x 5.5"D

-return to top-

AG-661 Insect Electrocutor

The AG-661 Insect Electrocutor is the premier outdoor flying insect light trap. This unit has heavy duty construction and large attraction range for aggressive flying insect control. It can be suspended by wall or post brackets away from buildings to suppress insect populations around boat docks, parking lots, or stadiums before they enter the area or building.

AG-661 features:

No chemicals
Aluminum construction which never rusts
Covers about 20,000 cu. ft. (200 lineal ft.)
Low annual maintenance
80 watts of U.V. insect attraction
UL listed; 115v/60hz, with 6' cord
1 year limited warranty
Dimensions: 56"W x 20.5 "H x 6.75"D

-return to top-

AG-963 Insect Electrocutor

The AG-963 Insect Electrocutor is designed for small areas where a vertical light trap is the best choice. This corner/wall mount light trap is great for hallways and interior rooms where fly control is important. The AG-963 has a removable catch tray to contain dead insects for later evaluation, identification, and disposal. Install 3 - 6 feet high on the wall.

AG-963 features:

24 hour, non-chemical trapping
White powder-coated steel construction
Covers 1,800 sq. ft. (50 lineal ft.)
No glue board replacement cost
U.V. output increased to 80 watts of insect attraction
UL listed; 115v/60hz, with 6' cord
FDA & USDA accepted under current code
3 year limited warranty
Dimensions: 26 "H x 15"W x 5"D

-return to top-

AG-970 Insect Electrocutor

The AG-970 Insect Electrocutor provides superior flying insect control for large indoor industrial and commercial buildings. The durable aluminum construction works well as a wall or recessed wall mount light trap. The vertical position of the AG-970, installed 1 - 2 feet above the floor, positions the 48" U.V. Insect Lights to attract flying insects where they are most active.

AG-970 features:

24 hour, non-chemical trapping
Aluminum construction which never rusts
Covers 2,500 sq. ft. (50 lineal ft.)
No glue board replacement cost
80 watts of U.V. insect attraction
UL listed; 115v/60hz, with 6' cord
FDA & USDA accepted under current code
3 year limited warranty
Dimensions: 14"W x 57 "H x 5.5"D

-return to top-

AG-241 Insect Electrocutor

The AG-241 Insect Electrocutor is useful as both a wall mount design and a ceiling suspended light trap. Shipping dock walls, warehouse ceilings, and hallway corridor ceilings are some of the locations where the AG-241 traps flying insects. The removable drawer allows easy access to evaluate, identify, and dispose of trapped insects.

AG-241 features:

No chemicals
Aluminum construction which never rusts
Covers about 20,000 cu. ft. (200 lineal ft.)
Low annual maintenance
80 watts of U.V. insect attraction
UL listed; 115v/60hz, with 6' cord
FDA & USDA accepted under current code
3 year limited warranty
Dimensions: 56 "W x 20.5 "H x 6.75"D

-return to top